Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| S3465 | BAE SYSTEMS HAGGLUNDS AB |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,CONDTN OPTL MIL STD SINGLE MATERIAL RESPONSE |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| AMFZ | SECOND END DIAMETER | 11.2 MILLIMETERS MINIMUM AND 11.4 MILLIMETERS MAXIMUM |
| MATT | MATERIAL | STEEL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 10.5 MILLIMETERS NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 28.90 MILLIMETERS MINIMUM AND 28.95 MILLIMETERS MAXIMUM |
| ATPC | STEP QUANTITY | 4 |
| AMDL | FIRST END DIAMETER | 12.97 MILLIMETERS MINIMUM AND 13.00 MILLIMETERS MAXIMUM |
| ABHP | OVERALL LENGTH | 83.0 MILLIMETERS NOMINAL |